FX SPARES

!

FX MUZZLE FLIP

Suits all FX Rifles with ½” thread on the muzzle. Mounted as standard on the Verminator.

FX FILL PROBE ADAPTOR

For easy swap between later model of quick charging connector and early model connector. Made of Hardened steel.

FX BARREL SUPPORT

Requires newer version air cylinder with raised section on end cap. Available for standard (14 mm). barrel and shrouded versions (16 mm). Replacement end cap is required if an older version of cylinder. Is to be used with barrel support.

FX TUBE CLAMP

Allows easy addition of a sling, strap, bipod or other accessory without any modification to the fore end of the stock. Suitable for all airtubess with a diameter of 33 mm.

FX EXTENSION TUBE

Add this to your existing airtube for additional volume. Approximately 5-10 more shots at high power. 45cc – 100 mm.

FX AIR TUBES

Available for all guns with removable air tube.
Front tubes: 240cc – 500mm, 185cc – 390mm, 150cc – 320mm, 65cc – 140mm, 45cc – 100mm.
Rear bottles: 500cc and 400cc

FX CHARGING KIT

Complete charging device for your scuba tank. Features: Pressure gauge, particle filter (replaceable), and bleed valve. Connections: Kevlar hose 0,5 m with 1/8” thread / FX Fill probe and DIN in scuba end.

FX 4 STAGE PUMP

The new Turbo Pump is equipped with a patented 4 stage system. It has a unique gearing system that gives you the opportunity to gear down when it gets rough.

FX GAUGE KIT

This gauge suits all our front airtubes. You can use it with or without barrel support.

GAUGE KIT 7040 - FOR ALL FX TUBES WITHOUT SUPPORT,

GAUGE KIT 7038 - 14mm BARREL SUPPORT INCLUDED

GAYGE KIT 7039 - 16mm BARREL SUPPORT INCLUDED

GAUGE KIT 7036 - SUITS ALL 33mm AIR TUBES

 

FX SINGLE SHOT PELLET TRAY

FOR RIFLES WITH SPRING TENSIONED MAGAZINES